dooch XQ-0075T-2, Installation Instructions Manual

Page: 56 / 80

Chapter 6. Function Table & Description
6.4.1 Description of Parameter Settings on Comm. Group Code
※
In case of a version of firmware is over Ver. 5.0, please don’t interlink with below Ver. 5.0.
Please update the firmware of a drive(below Ver. 5.0) as latest version if you want to interlink a drive(below
Ver. 5.0) with a drive(over Ver. 5.0) it is possible to check a version of drive on [Configualtion 90] (ref. P.63)
COMM. 2 : CAN COMM. ID
It is CAN Communication ID on Multi-Drive interoperation mode.
Be sure that ID is not duplicated for setup.
Functional Description
Interlock Mode
Comm. ID Number
Comm. 1
Comm. 3
Related Functions
CAN Comm. Mode
CAN Comm. Speed
Disabling (Signal Mode: Factory Setting)
56
6.4 Communication Group
CAN COMM. ID
0: Disable
1~6 : ID
RS-485 Comm. ID
RS-485 Comm. ID
RS-485 Comm. Speed
1: 1200 bps
2: 2400 bps
3: 4800 bps
4: 9600 bps
5: 19200 bps
RS-485 Delay Time 1~9999 (1ms Unit)
RS-485 Address Offset RS-485 Offset settings for the Data request Address
0
1
4
5
0
0~6
1~250
1~5
1~9999
-30000
~30000
-
-
-
-
ms
×
CAN Speed
1: 40kbps
2: 50kbps
3: 100kbps
4: 200kbps
5: 250kbps
1 1~5 - ×
RS-485 Comm. Setting
2
12
13
14
15
3
11 0 0~1 -
0: Disable
1: Enable
×
×
×
×
×
LCD Display Description Unit CODE
Factory
Setting
Range
Changable
in
Operation