dooch XQ-0075T-2, Installation Instructions Manual

Page: 10 / 80

Product model name is indicated as above. Initial four digits indicate driving capacity of the drive in
00.00kW unit. Decimal point is not indicated.
'T' refers Three phase.
'2' or '4' refers input voltage. (2: 200~240V, 4: 380~440V)
Make sure you install the product correctly considering the place, direction or surroundings in order
to prevent decrease in the life and performance of the VFD.
Chapter 1. Basics
1.3 Installation
Connect the power supply, electric motor and operating signals (control signals) to the terminal block.
If you fail to connect them correctly, the VFD and peripheral devices might be damaged.
This product has been certified with a CE
The electronics waste and recycling is subject to the provisions of national and local.
In many countries, they prohibit throwing out electronic equipments, and have ban
throwing away etronic equipments in the garbage.
1.4 Wiring
1.5 Certification Mark description
10
Model XQ-_____T-2
Rated motor [kW]
Rated output
Rated input
Rate motor [HP]
Output capacity [kVA]
Rated output current [A]
Output voltage [V]
Output frequency [Hz]
Rated input voltage [V]
Input frequency [Hz]
Protection class
Switching frequency [kHz]
Cooling Fan cooling
0.05 ~ 50/60
3Φ 200V~240V
50/60 (±5%)
IP55
1 ~ 15 (Automatic limitation according to temperature)
0.75
1
1.9
5
0075
Model specification
2.2
3
4.6
12
0220
4
5.5
6
16
0400
5.5
7.5
9.1
24
0550
1.5
2
3
8
0150
7.5
10
12.2
32
0750
3Φ 200~240V
11
15
17.1
45
1100
2. Specifications of product
2.1 Input voltage class: 200V (0.75~11kW)