dooch XQ-0075T-2, Installation Instructions Manual

Page: 52 / 80

Chapter 6. Function Table & Description
52
Functional Description
By Voltage Input
By Current Input
Input Range
0.0 ~ 10.0[V]
Factory Setting
0.0[V]
6.3.1 Signal Control Group
Signal 1 : AI1 Mode (Analog Input 1)
· When Pump Control Mode (Pump 1) is manual mode and Frequency Setup Mode is AI1, you can operate by
settings of external input current or frequency.
· You should set Jump J1 on the control board together.
Signal 2 : V1 Minimum Input Voltage
When AI1 Mode is set as a Voltage Input and you would enter the minimum Voltage coming from the external
input.
Input Range
0.0 ~ 20.0[mA]
Factory Setting
0.0[mA]
Signal 3 : I1 Minimum Input Current
When AI1 Mode is set as a Current Input and you would enter the minimum Current coming from the external
input.
Input Range
0.0 ~ 600.0
Factory Setting
0
Signal 4 : AI1 applied Min. value of attribute
A min. value of attribute corresponds to a value of current and voltage received from signal No.2, 3.
Input Range
0.0 ~ 10.0[V]
Factory Setting
10[V]
Signal 5 : Maximum Input Voltage
When AI1 Mode is set as a Voltage Input and you would enter the maximum Voltage coming from the external
input.
Input Range
0.0 ~ 20.0[mA]
Factory Setting
20.0[mA]
Signal 6 : Maximum Input Current
When AI1 Mode is set as a Current Input and you would enter the maximum Current coming from the external
input.
Input Range
0.0 ~ 600.0
Factory Settings
0
Signal 7 : AI1 applied Max. value of attribute
A max. value of attribute corresponds to a value of current and voltage received from signal No.5, 6.