DONATI SOLLEVAMENTI S.r.l. - Via Quasimodo,17 - 20025 Legnano (MI) - Tel. 0331 14811 - E: [email protected]
2
CONTENTS
page
1. PRELIMINARY INFORMATION
4
1.1 Contents and recipients of the operating manual
4
1.2 Symbols: meaning and usage
4
1.3 Collaborating with users
5
1.4 Conformity to norms and regulations
5
1.5 Manufacturer’s liability and warranty
6
2. DESCRIPTION OF COMPONENTS AND TECHNICAL SPECIFICATIONS
7
2.1 “DGT” series drive units for cranes
7
2.1.1 Intended and proper usage
7
2.1.2 The range of drive units
7
2.1.3 Components on drive units
8
2.2 “DGT” series endcarriages for bridge cranes
9
2.2.1 Intended and proper usage
9
2.2.2 The range of endcarriages
9
2.2.3 Components on endcarriages
10
2.3 Technical specifications and operating conditions
11
2.3.1 Regulatory framework
11
2.3.2 Electrical power – Protection and insulation of electrical parts
11
2.3.3 Surface finish
11
2.3.4 Environmental conditions for standard usage
11
2.3.5 Noise emissions - Vibrations
11
2.3.6 Classification of “DGT” series drive units
3. SAFETY AND ACCIDENT PREVENTION MEASURES
12
3.1 Operator qualifications
12
3.2 General safety norms and regulations
13
3.3 Safety symbols and warning labels
13
3.4 Warnings inherent to residual risks
15
3.5 Safety devices and indications
16
3.5.1 Control devices
16
3.5.2 Safety and emergency devices
16
3.5.3 Identification nameplate and markings
17
4. HANDLING - INSTALLATION – SET-UP
18
4.1 General notes on the shipment
18
4.2 Packaging, transport and handling
18
4.2.1 Standard packaging
18
4.2.2 Transport
19
4.2.3 Lifting points and handling equipment
19
4.2.4 Handling
20
4.2.5 Removing the packaging
20
4.3 Installing “DGT” drive units and endcarriages
20
4.3.1 Setting up “DGT” drive units onto a crane beam
21
4.3.2 Setting up “DGT” endcarriages onto a bridge crane
24
4.3.3 Connections and electrical diagrams
25
4.4 Setup and preparation
26
4.4.1 Preliminary operations
26
4.4.2 Settings and operating tests
26
4.4.3 Testing the “DGT” drive units and endcarriages – getting ready for operation
27
4.5 Disabling the units
28
4.5.1 Storing the units and parts
28
4.5.2 Resetting up the units after storage
28
