DONATI SOLLEVAMENTI S.r.l. - Via Quasimodo,17 - 20025 Legnano (MI) - Tel. 0331 14811 - E: [email protected]
18
4. - HANDLING - INSTALLATION – SETUP
4.1 – General notes on the shipment
•
“DGT” drive units and endcarriages are, as far as is possible, shipped pre-assembled in their
main parts.
•
The Buyer can proceed with installation phases (incorporating the units onto industrial lifting
or handling equipment) by following the instructions contained in this section of the
operating manual, entrusting such tasks to qualified personnel.
•
Due to the delicate and important nature of the operations described in this section, serious
risks for the health and safety of personnel can be incurred if such operations are carried out
inappropriately during the installation and use of the industrial lifting or handling equipment
on which the components are assembled.
•
As such, these operations must be performed by professionally trained and qualified
personnel specialized in the construction and/or assembly of lifting systems, with special
expertise in electromechanics, and equipped with personal safety and accident prevention
working equipment conforming to current legislative ordinances on matters related to safety
and accident prevention in the workplace, after having carefully read this operating manual.
On reception of the shipment, check to make certain that:
•
The documentation provided with the components, attached to this operating manual, comprises the
Manufacturer’s Declaration – Annexe IIB.
•
The packaging, if part of the shipment, is in good condition, and does not present damages.
In case of damage or missing parts, notify the shipping company of the irregularity, annexing a
written statement to the accompanying document and notifying
DONATI SOLLEVAMENTI S.r.l.
of the mishap within eight days of receiving the goods.
4.2 Packaging, transport and handling
Before carrying handling operations on the
“DGT” drive units and endcarriages, read the following:
4.2.1 Standard packaging
•
To facilitate handling and assembly operations, components are generally shipped separately or in carton boxes,
on appropriately bound pallets. Special protections or packagings are therefore excluded from the shipment.
•
In some cases, components can be packed in a crate or wooden case.
•
When materials are shipped on pallets, they are generally covered and protected against dust with a plastic film
wrapping.
•
Swinging gearmotors and related accessories are generally shipped inside carton boxes, which, depending on
the mass being handled, may or may not be equipped with pallets.
•
Standard packagings are not provided with protection against rain, and are foreseen for destinations via ground
and not sea shipments, for covered and non humid environments.
•
Packages, suitably conserved, can be stored for a period of around two years in a covered environment in which
the temperature is comprised between - 20°C and + 60°C with a relative humidity of 80%.
Any special packaging, waterproofed and/or for destinations shipped by sea, can be
appropriately prepared at the Buyer’s request.
