DONATI SOLLEVAMENTI S.r.l. - Via Quasimodo,17 - 20025 Legnano (MI) - Tel. 0331 14811 - E: [email protected]
19
4.2.2 Transport
•
Entrust all transport operations to qualified personnel, capable of guaranteeing a correct handling of materials;
•
During transport operations, the manufacturer recommends avoiding the following:
•
do not place onto the components other packages which may cause damage;
•
do not place the beam girders on the wheels, placing them onto wooden blocks instead (fig. 6);
•
do not tilt or overturn pallets, crates/cases or boxes containing the materials, so as to prevent dangerous
oscillations and ensure constant stability.
DONATI SOLLEVAMENTI S.r.l.
declines all responsibility for transport operations performed by
the Buyer or shipping companies appointed by the Buyer.
4.2.3 Lifting points and handling equipment
•
To ensure safe handing operations, in relation to the configuration foreseen, the
“DGT” drive units
or
endcarriages
and related accessories are fitted with the following lifting points:
A. “DGT” drive units
, comprising the
wheel groups
and related
“DGP” offset geared motors:
1.
“DGT” wheel groups
are fitted with special holes for handling purposes, situated in the upper section of
the wheel bearing flanges, which enable lifting using a transverse bar of suitable diameter, and a lifting
accessory (slinging the group using two chains or straps) - (fig. 7).
The wheel groups weight less than 30 kg and as such can be handled manually.
2.
“DGP” offset geared motors
, which are always provided separately from wheel groups or running beams,
when their weight exceeds 30 kg and cannot be handled manually must be lifted using suitable straps fitted
like a “noose” in the gearmotor connection area (fig. 8).
3. The handling operations outlined at points 1 and 2 must be performed using lifting machinery (a bridge or
jib crane, etc.), adopted in relation to the weight of the mass indicated on the packaging being handled.
4. If the packagings are placed onto pallets, the pallet must be handled using a fork lift or transpallet, adopted
in relation to the weight being handled, whereas individual packagings (if they cannot be handled manually)
must be lifted using lifting equipment and related accessories, as outlined below.
B. “DGT” drive units
, comprising the
beam girder
cover and
“DGP” offset geared motors:
1. The
beam girders
can be handled using a fork lift or lifting machinery (a bridge or jib crane, etc.) equipped
with suitable straps fitted like a “noose”. Lifting equipment adopted must be selected in relation to the mass
indicated on the packaging and employed so as to ensure proper balancing. (fig. 9).
2. For handling
“DGP” offset geared motors
, proceed as outlined at points A2 and A3.
fig. 6
fig. 7
fig. 8
fig. 9
