DONATI SOLLEVAMENTI S.r.l. - Via Quasimodo,17 - 20025 Legnano (MI) - Tel. 0331 14811 - E: [email protected]
9
2.2 “DGT” series Endcarriages for bridge cranes
2.2.1 Intended and proper usage
•
The
endcarriages
are designed for handling operations on rails on
bridge cranes
:
•
at a running speed of from 3.2 to 25 m/min;
•
at two running speeds, from 12.5/3.2 to 80/20 m/min;
operating on:
•
single girder, with a capacity of up to 20,000 kg and gauge of up to 25 m
;
•
double girder, with a capacity of up to 40,000 kg and gauge of up to 27 m
.
•
The
endcarraiges
are equipped with
drive units
comprising
“DGT”
series wheel groups
, which, in
combination with
“DGP” series offset geared motors
, guarantee:
•
accurate alignments;
•
control over high running speeds;
•
easy installation and maintenance.
2.2.2 The range of endcarraiges
•
The range of
endcarriages for bridge cranes
are designed in
6 production sizes
corresponding to the
dimensions of the respective wheels, in
17 configurations
based on
7 different wheel pitch lengths
calibrated
in relation to the gauges and type of bridge crane they are combined with, i.e.:
•
6 “DGT” series drive wheel group sizes:
(Ø 125, Ø 160, Ø 200, Ø 250, Ø 315 and Ø 400/400 R)
•
17 configurations based on the wheel pitch:
(1800 mm; 2100 mm; 2400 mm; 2700 mm; 3300 mm; 3600 mm; 3900 mm)
Operating limitations for endcarriages on SINGLE GIRDER or DOUBLE GIRDER bridge cranes, in relation to span
Endcarriages
are
equipped with
Drive Units
, comprising
“DGT” series Wheel Groups
in combination
with
“DGP” series Offset Geared Motors
,
as outlined in section 2.1.
