BR342 Ducted Installation Instructions
Installing the Unit
16
FIG. 11
NOTICE!
Incorrect installation of the divider could cause compressor to short-
cycle, resulting in supply circuit overload and reduced product
performance.
•
Place the divider plate up to bottom of the unit base pan firmly. The foam tape on
the divider plate must seal to bottom of base pan. See FIG. 11.
NOTE
The adhesive on the double-sided tape is extremely sticky. Make sure
the divider plate is properly positioned before pressing into place.
•
With slight pressure push the divider plate against the double-sided tape on the
ceiling template.
•
Locate the 3.2 × 177.8 × 457.2mm self-adhesive insulation supplied with the
RAG kit. Remove the backing paper from the insulation and carefully stick onto
the ceiling template divider plate. See FIG. 12.
FIG. 12
