BR342 Ducted Installation Instructions
Choosing a Fitment Location
•
The roof must be designed to support 59 kg when the RV is in motion. Normally a
90.7kg. static load design will meet this requirement.
•
Check inside the RV for return air grille (RAG) obstructions (i.e. door openings,
room dividers, curtains, ceiling fixtures, etc.). See (FIG. 2).
8
NOTICE!
Maintain structural integrity. Otherwise damage to product and/or RV could occur.
FIG. 2
431.8mm
431.8mm
431.8mm
431.8mm
19mm
38mm
38mm
31.75mm
44.45mm
Roof Preparation
WARNING!
Fire or Electrical Shock Hazard:
Make sure there are no obstacles
(wires
, pipes, etc.) inside RV’s [roof / floor
/ walls]. Shut OFF gas supply,
disconnect 240VAC power from RV, and disconnect po) 12VDC
terminal from supply battery
BEFORE
drilling or cutting into RV. Failure to
obey these warnings could result in death or serious injury.
