CT100G Series Inverter
CHAPTER 2 INSTALLATION AND WIRING
- 17 -
Figure 2-2 Standard wiring diagram
2.4 Control circuit connection
2.4.1Precautions
Please apply the multi-core shielded cable or twisted pair to connect the control
terminals. When using the shielded cable (near one side of the inverter), connect
it to the PE terminal of the inverter. Keep the control cable away from the main
circuit and strong power circuit (including power cables, motor cables, relays,
contactors, etc.) more than 20cm. Vertical wiring is recommended instead of
parallel wiring to prevent the inverter malfunction caused by external
interference.
2.4.2S
chematic diagram of the control plate
