Dodge HORNET 2023 Owner'S Manual Download Page 75

Page: 75 / 288

GETTING TO KNOW YOUR INSTRUMENT PANEL

Engine Coolant Temperature Warning

Light

This warning light will illuminate to warn of an

overheated engine condition. If the engine

coolant temperature is too high, this light will

illuminate and a single chime will sound.

If the light turns on while driving, safely pull over and stop

the vehicle. If the Air Conditioning (A/C) system is on, turn

it off. Also, shift the transmission into NEUTRAL (N) and

idle the vehicle. If the temperature reading does not return

to normal, turn the engine off immediately and call for

service

page 218.

Hood Open Warning Light

This warning light will illuminate when the

hood is left open and not fully closed.

NOTE:

If the vehicle is moving, there will also be a single chime.

Liftgate Open Warning Light

This warning light will illuminate when the

liftgate is open.

NOTE:

If the vehicle is moving, there will also be a single chime.

Oil Pressure Warning Light

This warning light will illuminate to indicate low

engine oil pressure. If the light turns on while

driving, stop the vehicle, shut off the engine as

soon as possible, and contact an authorized

dealer. A chime will sound when this light turns on.
Do not operate the vehicle until the cause is corrected.

This light does not indicate how much oil is in the engine.

The engine oil level must be checked under the hood.

Oil Temperature Warning Light

This warning light will illuminate to indicate the

engine oil temperature is high. If the light turns

on while driving, stop the vehicle and shut off

the engine as soon as possible. Wait for oil

temperature to return to normal levels.

Seat Belt Reminder Warning Light

This warning light indicates when the driver or

passenger seat belt is unbuckled. When the

ignition is first placed in the ON/RUN position

and if the driver’s seat belt is unbuckled, a

chime will sound and the light will turn on. When driving, if

the driver or front passenger seat belt remains unbuckled,

the Seat Belt Reminder Light will flash or remain on

continuously and a chime will sound

page 168.

Transmission Fault Warning Light —

If Equipped

This light will illuminate (together with a

message in the instrument cluster display and

a buzzer) to indicate a transmission fault.

Contact an authorized dealer if the message

remains after restarting the engine.

Vehicle Security Warning Light —

If Equipped

This light will flash at a fast rate for

approximately 15 seconds when the Vehicle

Security system is arming, and then will flash

slowly until the vehicle is disarmed.

ELLOW

ARNING

IGHTS

Auto Liftgate Fault Warning Light —

If Equipped

This warning light will illuminate to signal when

there is a fault detected with the Auto Liftgate.

WARNING!

A hot engine cooling system is dangerous. You or others

could be badly burned by steam or boiling coolant. It is

recommended to call an authorized dealer for service if

your vehicle overheats

page 233.

CAUTION!

Driving with a hot engine cooling system could damage

your vehicle. If the temperature gauge reads “H”, pull

over and stop the vehicle. Idle the vehicle with the air

conditioner turned off until the pointer drops back into

the normal range. If the pointer remains on the “H”,

turn the engine off immediately and call an authorized

dealer for service.

23_GG_OM_EN_USC_t.book Page 73

Summary of Contents for HORNET 2023

































































































































































































































































































Search results

Summary of Contents for HORNET 2023

Reviews:

Brands by name

Popular brands

Dodge HORNET 2023, Owner'S Manual

Search results

Summary of Contents for HORNET 2023

Reviews:

Brands by name

Popular brands