Dodge HORNET 2023 Owner'S Manual Download Page 49

Page: 49 / 288

GETTING TO KNOW YOUR VEHICLE

Recirculation Button

Press and release this button on the

touchscreen, or push the button on the

faceplate, to change the system between

automatic, recirculation, and outside air

modes. Recirculation can be used when outside

conditions such as smoke, odors, dust, or high humidity

are present. Recirculation can be used in all modes.

Recirculation may be unavailable (button on the

touchscreen grayed out) if conditions exist that could

create fogging on the inside of the windshield. The A/C can

be deselected manually without disturbing the mode

control selection. Continuous use of the Recirculation

mode may make the inside air stuffy and window fogging

may occur. Extended use of this mode is not

recommended.

AUTO Button

Press and release this button on the

touchscreen, or push the button on the

faceplate, to change the current setting. The

AUTO indicator illuminates when AUTO is on.

This feature automatically controls the interior cabin

temperature by adjusting distribution and amount of

airflow. Toggling this function will cause the system to

switch between manual override mode and automatic

modes

page 49.

MAX Defrost Button

Press and release the touchscreen button, or

push and release the button on the faceplate,

to change the current airflow setting to Defrost

mode. The indicator illuminates when this

feature is on. Performing this function will cause the

automatic climate controls to change to manual mode,

and the following settings will occur:



The blower speed increases to full (all LEDs on)

NOTE:

The blower speed increases to full only if warm outlet

temperature can be guaranteed. Otherwise, the blower

bars will be proportional to outlet air temperature.



The air conditioning compressor is turned on

(A/C LED off)



Both driver and passenger temperature controls are

set to HI



Defrost mode is selected (LED on)



Rear defroster is turned on (LED on)



The air recirculation is turned off (LED off)

If MAX Defrost mode is turned off, the Climate Control

system will return to the previous setting. MAX Defrost

automatically turns off after a few minutes.

Rear Defrost Button

Press and release the button on the

touchscreen, or push and release the button on

the faceplate, to turn on the rear window

defroster and the heated outside mirrors

(if equipped). The Rear Defrost indicator illuminates when

the rear window defroster is on. The rear window defroster

automatically turns off after 10 minutes.

CAUTION!

Failure to follow these cautions can cause damage to

the heating elements:



Use care when washing the inside of the rear

window. Do not use abrasive window cleaners on the

interior surface of the window. Use a soft cloth and a

mild washing solution, wiping parallel to the heating

elements. Labels can be peeled off after soaking

with warm water.



Do not use scrapers, sharp instruments, or abrasive

window cleaners on the interior surface of the

window.



Keep all objects a safe distance from the window.

23_GG_OM_EN_USC_t.book Page 47

Summary of Contents for HORNET 2023

































































































































































































































































































Search results

Summary of Contents for HORNET 2023

Reviews:

Brands by name

Popular brands

Dodge HORNET 2023, Owner'S Manual

Search results

Summary of Contents for HORNET 2023

Reviews:

Brands by name

Popular brands