Dodge HORNET 2023 Owner'S Manual Download Page 105

Page: 105 / 288

STARTING AND OPERATING

103

System Deactivation
The system will be deactivated in any of the following

situations:



If the system has detected driver inattentiveness, and

has gone through all escalation warnings after hands

are no longer detected on the steering wheel



If the vehicle is driving in constant traffic



If lane markings are no longer detected



If the brake pedal is pressed or ACC system is deacti

vated



If the Active Driving Assist on/off button is pushed

again (ADA will turn off)



If a turn signal is used (unless a target is in the blind

spot zone on the same side the turn signal is being

applied)



If the driver applies enough input to the steering wheel



If the driver’s seat belt is released



If the vehicle speed exceeds 93 mph (150 km/h)



If the Active Driving Assist on/off button is pushed

again (ADA will turn off)



If the Forward Collision Warning (FCW) system

becomes active and is providing warnings/braking



If there is glare from the sun on the vehicle’s camera



If the vehicle is driving on tight curves



If the camera has decreased visibility due to rain,

snow, etc.



If the driver quickly applies the accelerator pedal

NOTE:



Pushing the Active Driving Assist on/off button or deac

tivating ACC will turn the system off. All other deactiva

tion conditions will place the system back into the

“enabled” state with the steering wheel indicator

displayed in white until all engagement conditions are

met again.



When the system is deactivated, the system status

indicator lights will turn off, the LaneSense system will

return to its previous state, and ACC will disable.

NDICATIONS

ISPLAY

The Active Driving Assist system status can always be

viewed in the instrument cluster display, and status

changes are shown by changes in color of the system’s

indicator lights.
As the system detects driver inattentiveness as previously

described

page 101, the system status indicator lights

will change from green, to yellow, to red. The following

indicators will change in color as warnings to the driver

escalate:



Active Driving Assist Indicator (steering wheel icon in

the instrument cluster display)



Glow effect of the instrument cluster display

If driver attention is not returned, the system will

deactivate.

Active Driving Assist Indicators Are Off



ADA is not turned on/enabled by the driver.

Active Driving Assist Indicators Are White



ADA is turned on/enabled by the driver, but the system

is not actively steering and providing speed control for

the vehicle.

Active Driving Assist Indicators Are Green



The system detects driver is attentive and is actively

steering and providing speed control for the vehicle.

Active Driving Assist Indicators Are Yellow



Driver inattentiveness has been detected, warning the

driver to place hands on the steering wheel.

Active Driving Assist Indicators Are Red



Driver inattentiveness is still being detected, or driver

take-over is being requested, warning the driver to

place hands on the steering wheel. This warning is also

issued when the system has detected a tight curve and

is warning the driver to take control.

NOTE:

The driver MUST replace hands on the steering wheel and

take control of the vehicle when the system is deactivated.

23_GG_OM_EN_USC_t.book Page 103

Summary of Contents for HORNET 2023

































































































































































































































































































Search results

Summary of Contents for HORNET 2023

Reviews:

Brands by name

Popular brands

Dodge HORNET 2023, Owner'S Manual

Search results

Summary of Contents for HORNET 2023

Reviews:

Brands by name

Popular brands