Dodge HORNET 2023 Owner'S Manual Download Page 205

Page: 205 / 288

203

IN CASE OF EMERGENCY

HAZARD WARNING FLASHERS

The Hazard Warning Flashers button is located on the

switch bank just below the radio screen.

NOTE:

Your vehicle may be equipped with an Emergency Stop

Signal (ESS)

page 157.

Hazard Warning Flashers Button

Push the button to turn on the Hazard Warning Flashers.

When the button is activated, all directional turn signals

will flash on and off to warn oncoming traffic of an

emergency. Push the button a second time to turn off the

Hazard Warning Flashers.

This is an emergency warning system and it should not be

used when the vehicle is in motion. Use it only when your

vehicle is disabled or signaling a safety hazard warning for

other motorists.
When you must leave the vehicle to seek assistance, the

Hazard Warning Flashers will continue to operate even

though the ignition is placed in the OFF position.

NOTE:

With extended use, the Hazard Warning Flashers may

wear down your battery.

SOS SYSTEM — IF EQUIPPED

If equipped, the overhead console contains an SOS

button.

SOS Button Location

NOTE:



Your vehicle may be transmitting data as authorized by

the subscriber

page 275.



The SOS button will only function if you are connected

to an operable LTE (voice/data) or 4G (data) network,

which comes as a builtin function. Other services will

only be operable if your Dodge Connected services is

active and you are connected to an operable LTE

(voice/data) or 4G (data) network.

WARNING!

ALWAYS obey traffic laws and pay attention to the road.

ALWAYS drive safely with your hands on the steering

wheel. You have full responsibility and assume all risks

related to the use of the features and applications in

this vehicle. Only use the features and applications

when it is safe to do so. Failure to do so may result in an

accident involving serious injury or death.

23_GG_OM_EN_USC_t.book Page 203

Summary of Contents for HORNET 2023

































































































































































































































































































Search results

Summary of Contents for HORNET 2023

Reviews:

Brands by name

Popular brands

Dodge HORNET 2023, Owner'S Manual

Search results

Summary of Contents for HORNET 2023

Reviews:

Brands by name

Popular brands