Dodge HORNET 2023 Owner'S Manual Download Page 59

Page: 59 / 288

GETTING TO KNOW YOUR VEHICLE

PENING

LOSING

UNROOF

The sunroof has two programmed automatic stops for the

sunroof open position: a comfort stop position and a full

open position. The comfort stop position has been

optimized to minimize wind buffeting.
Express Open/Close
Push the switch rearward and release it within one-half

second and the sunroof will open automatically from any

position. The sunroof will open fully and stop

automatically.
Push the switch forward and release it within one-half

second and the sunroof will close automatically from any

position. The sunroof will close fully and stop

automatically.
During Express Open or Express Close operation, any

other movement of the sunroof switch will stop the

sunroof.
Manual Open/Close
To open the sunroof, push and hold the switch in the

rearward position.
To close the sunroof, push and hold the switch in the

forward position.
Any release of the switch during open or close operation

will stop the sunroof movement. The sunroof will remain in

a partially opened position until the switch is operated and

held again.

NOTE:

If the sunshade is in the closed position when Express or

Manual Open operation is initiated the sunshade will auto

matically open prior to the sunroof opening.
Venting The Sunroof
Push and release the Vent button within one-half second

and the sunroof will open to the vent position. This is

called Express Vent, and it will occur regardless of sunroof

position. During Express Vent operation, any movement of

the switch will stop the sunroof.

NOTE:

If the sunshade is in the closed position when the vent

switch is pushed, the sunshade will automatically open

prior to the sunroof opening to the Vent position.

PENING

LOSING

OWER

UNSHADE

If the sunroof is open or vented, the sunshade cannot be

closed beyond the half open position. Pushing the

sunshade close switch when the sunroof is open/vented

and the sunshade is at half open position will first

automatically close the sunroof prior to the sunshade

closing.

Express Open/Close
Push the sunshade switch rearward and release it within

one-half second, the sunshade will open automatically.
Push the sunshade switch forward and release it within

one-half second and the sunshade will close

automatically.
During Express Open or Express Close operation, any

other actuation of the sunroof switches will stop the

sunshade in a partially open position.
Manual Open/Close
Push and hold the sunshade switch rearward, the

sunshade will open.
Push and hold the switch forward and the sunshade will

close and stop at full closed position.
Releasing the switch while the sunshade is in motion will

stop the sunshade in a partially open position.

INCH

ROTECT

EATURE

The sunroof has an anti-pinch safety system capable of

detecting the presence of an obstacle during the closing

movement. If an obstacle is detected, the system

intervenes and the movement of the sunroof is

immediately reversed.

23_GG_OM_EN_USC_t.book Page 57

Summary of Contents for HORNET 2023

































































































































































































































































































Search results

Summary of Contents for HORNET 2023

Reviews:

Brands by name

Popular brands

Dodge HORNET 2023, Owner'S Manual

Search results

Summary of Contents for HORNET 2023

Reviews:

Brands by name

Popular brands