Dodge Durango 2015, Operating Information Manual

Page: 86 / 738

Front Heated Seats
The front heated seats control buttons are lo-
cated within the climate or controls screen of the
touchscreen.
You can choose from HI, LO or OFF heat
settings. The indicator lights in each switch
indicate the level of heat in use. Two indicator
lights will illuminate for HI, one for LO and none
for OFF.
•
Press the heated seat button once to turn
the HI setting ON.
•
Press the heated seat button a second
time to turn the LO setting ON.
•
Press the heated seat button a third time
to turn the heating elements OFF.
If the HI-level setting is selected, the system will
automatically switch to LO-level after approxi-
mately 60 minutes of continuous operation. At
that time, the display will change from HI to LO,
indicating the change. The LO-level setting will
turn OFF automatically after approximately
45 minutes.
NOTE:
•
Once a heat setting is selected, heat will
be felt within two to five minutes.
•
The engine must be running for the
heated seats to operate.
This feature can be programmed through the
Uconnect® system. Refer to “Uconnect® Set-
tings” in “Understanding Your Instrument Panel”
for further information.
Rear Heated Seats — If Equipped
On some models, the two rear outboard seats
may be equipped with heated seats. There are
two heated seat switches that allow the rear
passengers to operate the seats independently.
The heated seat switches for each heater are
located on the rear of the center console.
You can choose from HIGH, LOW or OFF heat
settings. Amber indicator lights in each switch
indicate the level of heat in use. Two indicator
lights will illuminate for HIGH, one for LOW and
none for OFF.
Press the switch once to select
HIGH-level
heating. Press the
switch a second time to select
LOW-level
heating. Press the
switch a third time to shut the heat-
ing elements OFF.
Rear Heated Seat Switches
83