Dodge Durango 2015, Operating Information Manual

Page: 183 / 738

is new, the compass may appear erratic and
may need to be calibrated. You may calibrate
the compass by selecting the “Calibration” but-
ton on the touchscreen, a pop menu will appear
asking you to finish calibrating process by com-
pleting one or more 360-degree turns (in an
area free from large metal or metallic objects).
Once the calibrating process is successfully
finished, a message on the screen will show it
was done successfully. The compass will now
function normally.
Audio
After pressing the “Audio” button on the touch-
screen the following settings will be available:
•
Balance/Fade
When in this display you may adjust the Bal-
ance and Fade settings.
•
Equalizer
When in this display you may adjust the Bass,
Mid and Treble settings. Adjust the settings with
the “+” and “–” setting buttons on the touch-
screen or by selecting any point on the scale
between the “+” and “–” buttons on the touch-
screen. Then press the back arrow button on
the touchscreen.
NOTE:
Bass/Mid/Treble allow you to simply slide
your finger up or down to change the setting
as well as press directly on the desired
setting.
•
Speed Adjusted Volume
This feature increases or decreases volume
relative to vehicle speed. To change the Speed
Adjusted Volume press the “Off,” “1,” “2” or “3”
button on the touchscreen. Then press the back
arrow button on the touchscreen.
•
Surround Sound
This feature provides simulated surround sound
mode. To make your selection, press the “Sur-
round Sound” button on the touchscreen, select
“On” or “Off” followed by pressing the back
arrow button on the touchscreen.
•
AUX Volume Match — If Equipped
This feature provides the ability to tune the
audio level for portable devices connected
through the AUX input. To make your selection,
press the “AUX Volume Match” button on the
touchscreen, select “On” or “Off” followed by
pressing
the back arrow button on the
touchscreen.
•
Loudness — If Equipped
The Radio automatically turns on when vehicle
is in run or will recall whether it was on or off at
last ignition off. To make your selection, press
the “Loudness” button on the touchscreen, se-
lect “On” or “Off” followed by pressing the back
arrow button on the touchscreen.
Phone/Bluetooth®
After pressing the “Phone/Bluetooth®” button
on the touchscreen the following settings will be
available:
•
Paired Phones
This feature shows which phones are paired to the
Phone/Bluetooth® system. For further information,
refer to the Uconnect® Supplement Manual.
180