To Set A Desired ACC Speed
When the vehicle reaches the speed desired,
push the SET + button or the SET - button and
release. The DID will display the set speed.
If the system is Set when the vehicle speed is
below 19 mph (30 km/h), the Set Speed shall be
defaulted to 19 mph (30 km/h). If the system is
Set when the vehicle speed is above 19 mph
(30 km/h), the Set Speed shall be the current
speed of the vehicle.
NOTE:
ACC cannot be set if there is a stationary
vehicle in front of your vehicle in close
proximity.
Remove your foot from the accelerator pedal. If
you do not, the vehicle may continue to accel-
erate beyond the set speed. If this occurs:
•
The message “DRIVER OVERRIDE” will dis-
play in the DID.
•
The system will not be controlling the dis-
tance between your vehicle and the vehicle
ahead. The vehicle speed will only be deter-
mined by the position of the accelerator
pedal.
To Cancel
The following conditions cancel the system:
•
The brake pedal is applied.
•
The CANCEL button is pressed.
•
An Anti-Lock Brake System (ABS) event
occurs.
•
The shift lever/gear selector is removed from
the Drive position.
•
The Electronic Stability Control/Traction Con-
trol System (ESC/TCS) activates.
•
The vehicle parking brake is applied.
•
Driver seatbelt is unbuckled at low speeds.
•
Driver door is opened at low speeds.
•
A Trailer Sway Control (TSC) event occurs.
•
The driver switches ESC to full-off mode.
To Turn Off
The system will turn off and clear the set speed
in memory if:
•
The Adaptive Cruise Control (ACC) ON/OFF
button is pressed.
•
The Normal (Fixed Speed) Electronic Speed
Control ON/OFF button is pressed.
•
The ignition is turned OFF.
•
You switch to Four-Wheel Drive Low.
To Resume
If there is a set speed in memory press the RES
(resume) button and then remove your foot from
the accelerator pedal. The DID will display the
last set speed.
NOTE:
•
If your vehicle stays at standstill for lon-
ger than two seconds, then the system
will cancel and the brake force will be
ramped-out. The driver will have to apply
the brakes to keep the vehicle at a stand-
still.
•
ACC cannot be resumed if there is a
stationary vehicle in-front of your vehicle
in close proximity.
111
Summary of Contents for Durango 2015
