Dodge 2012 Challenger Owner'S Manual Download Page 385

Page: 385 / 504

WARNING! (Continued)

•

Never start or run the engine with the vehicle on a
jack.

•

Do not let anyone sit in the vehicle when it is on a
jack.

•

Do not get under the vehicle when it is on a jack.

•

Only use the jack in the positions indicated and
for lifting this vehicle during a tire change.

•

If working on or near a roadway, be extremely
careful of motor traffic.

CAUTION!

Do not attempt to raise the vehicle by jacking on
locations other than those indicated in the Jacking
Instructions for this vehicle.

1. Remove the spare tire, jack, and lug wrench.

Jack Warning Label

Jack Engagement Locations

WHAT TO DO IN EMERGENCIES

383

Summary of Contents for 2012 Challenger

























































































































































































































































































































































































































































































































Search results

Summary of Contents for 2012 Challenger

Reviews:

Related manuals for 2012 Challenger

Brands by name

Popular brands

Dodge 2012 Challenger, Owner'S Manual

Search results

Summary of Contents for 2012 Challenger

Reviews:

Related manuals for 2012 Challenger

Brands by name

Popular brands