Dodge 2012 Challenger Owner'S Manual Download Page 95

Page: 95 / 504

move. When you are finished adjusting the mirror, turn
the control to the center position to prevent accidentally
moving a mirror.

Heated Mirrors — If Equipped

These mirrors are heated to melt frost or ice. This
feature is activated whenever you turn on the rear

window defroster. Refer to “Rear Window Features” in
“Understanding The Features Of Your Vehicle” for fur-
ther information.

Vanity Mirrors

A vanity mirror is located on the sun visor. To use the
mirror, rotate the sun visor downward and swing the
mirror cover upward.

Power Mirror Control

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Summary of Contents for 2012 Challenger

























































































































































































































































































































































































































































































































Search results

Summary of Contents for 2012 Challenger

Reviews:

Related manuals for 2012 Challenger

Brands by name

Popular brands

Dodge 2012 Challenger, Owner'S Manual

Search results

Summary of Contents for 2012 Challenger

Reviews:

Related manuals for 2012 Challenger

Brands by name

Popular brands