Dodge 2012 Challenger Owner'S Manual Download Page 451

Page: 451 / 504

Center Tail/Backup Lamp

See your authorized dealer for bulb replacement.

Center High-Mounted Stop Lamp (CHMSL)

The CHMSL uses LED lamps that are not serviceable
separately. The CHMSL must be replaced as an assembly,
see your authorized dealer.

License Lamp

1. Remove the screws securing the lamp to the rear
fascia.

2. Remove the bulb and socket assembly.

3. Disconnect the bulb from the socket assembly and
install the replacement bulb.

4. Reinstall the bulb and socket assembly.

5. Reattach the lamp to the rear fascia, and then install
the screws.

1 — License Lamp Bulb
2 — Socket

MAINTAINING YOUR VEHICLE

449

Summary of Contents for 2012 Challenger

























































































































































































































































































































































































































































































































Search results

Summary of Contents for 2012 Challenger

Reviews:

Related manuals for 2012 Challenger

Brands by name

Popular brands

Dodge 2012 Challenger, Owner'S Manual

Search results

Summary of Contents for 2012 Challenger

Reviews:

Related manuals for 2012 Challenger

Brands by name

Popular brands