Dodge 2012 Challenger Owner'S Manual Download Page 452

Page: 452 / 504

FLUID CAPACITIES

U.S.

Metric

Fuel (Approximate)

All Engines

19 Gallons

72 Liters

Engine Oil with Filter

3.6 Liter Engine (SAE 5W-30, API Certified)

6 Quarts

5.6 Liters

5.7 Liter Engine (SAE 5W-20, API Certified)

7 Quarts

6.6 Liters

Cooling System *

3.6 Liter Engine (MOPAR

威

Antifreeze/Coolant 5 Year/100,000 Mile

Formula or equivalent)

11.1 Quarts

10.5 Liters

5.7 Liter Engine (MOPAR

威

Antifreeze/Coolant 5 Year/100,000 Mile

Formula or equivalent)

14.7 Quarts

13.9 Liters

* Includes heater and coolant recovery bottle filled to MAX level.

450

MAINTAINING YOUR VEHICLE

Summary of Contents for 2012 Challenger

























































































































































































































































































































































































































































































































Search results

Summary of Contents for 2012 Challenger

Reviews:

Related manuals for 2012 Challenger

Brands by name

Popular brands

Dodge 2012 Challenger, Owner'S Manual

Search results

Summary of Contents for 2012 Challenger

Reviews:

Related manuals for 2012 Challenger

Brands by name

Popular brands