Dodge 2012 Challenger Owner'S Manual Download Page 396

Page: 396 / 504

3. Turn the ignition switch to the ON/RUN position
(engine Off).

4. Press and maintain firm pressure on the brake pedal.

5. Using a screwdriver or similar tool, press and hold the
override tab through the access port on the center con-
sole.

6. Move the shift lever to the NEUTRAL position.

7. The vehicle may then be started in NEUTRAL.

8. Reinstall the shift lever override access cover.

Shift Lever Override Access Cover

394

WHAT TO DO IN EMERGENCIES

Summary of Contents for 2012 Challenger

























































































































































































































































































































































































































































































































Search results

Summary of Contents for 2012 Challenger

Reviews:

Related manuals for 2012 Challenger

Brands by name

Popular brands

Dodge 2012 Challenger, Owner'S Manual

Search results

Summary of Contents for 2012 Challenger

Reviews:

Related manuals for 2012 Challenger

Brands by name

Popular brands