Settings
76
◆
Security codes for the terminal
Some functions provided for convenient use of the
terminal require the security code to use them. Besides the
security code for locking the terminal, the network security
code necessary for the network services etc. are available.
Make use of the terminal using an appropriate security
code according to your purpose.
Notes on the security codes
･
To set a security code, avoid imaginable numbers
such as "birth date", "a part of phone number",
"street address or room number", "1111" or "1234".
Maintain a separate record not to forget the
numbers.
･
Be careful never to reveal your security code to
others. If a security code is misused by others,
DOCOMO assumes no responsibility for damages
resulted from it.
･
If you forget your security codes, you need to bring
a document (a driver's license etc.) to identify your
subscription, the terminal and the docomo mini
UIM card to a docomo Shop. For details, contact
"General Inquiries" on the last page of this manual.
･
The PUK code is written on a subscription form
(copy for user) handed at subscription in a docomo
Shop. For users subscribed in other than docomo
Shop, bring a document (a drivers license etc.) to
identify your subscription and the docomo mini
UIM card to a docomo Shop, or contact "General
Inquiries" on the last page of this manual.
❖
Network security code
The network security code is a 4-digit number necessary
for identification or using the docomo Network Services at
reception of your request in docomo Shop or at a docomo
Shop or docomo Information Center. It can be set any
number at the subscription and also changed later by
yourself.
You can change your network security code to the new one
using the PC if you have the "docomoID/Password" for the
"My docomo" General support site for PC. If you use
dmenu, dmenu
→
"
お客様サポートへ
(To Customer
support)"
→
You can change them yourself from "
各種お申
込・お手続き
(Various application/Procedures)" (in
Japanese only).
*
For "My docomo", "
お客様サポート
(Customer support)", see
the reverse side of the back cover of this manual (for the
"Instruction Manual" application, "
マナーもいっしょに携帯
しましょう
(Using mobile phone with your manners!)" in "
付
録
(Appendix)").
❖
PIN code
Security code called as PIN code can be set in the docomo
mini UIM card. The code is set to "0000" at the time of
subscription, but you can change the number by yourself.
→
P77
PIN is a 4- to 8-digit number (code) that must be entered for
user confirmation to prevent unauthorized use by a third
party every time you insert the docomo mini UIM card into
the terminal or when the terminal is powered ON. Entering
the PIN code enables making/receiving calls and terminal
operation.
･
For using the docomo mini UIM card that you have used
on another terminal by inserting to this terminal, use the
set PIN code on the former terminal. If you did not
change the setting, the code is "0000".
･
If you enter a wrong PIN code 3 times consecutively, the
PIN code is locked and cannot be used anymore. In this
case, unlock with "PUK". Unlock the PIN code before
setting new PIN code.
Lock/Security
