Before using the terminal
38
Enter characters using software keyboard displayed on
the screen.
･
Entering characters with NX!input is mainly described in
this section.
･
Switching to other input method is available.
→
P42
･
You can connect an external keyboard to enter
characters.
→
P45
◆
Using keypad
You can enter characters using numeric keypad, QWERTY
keypad or handwritten input.
･
You can activate voice input from each keypad.
→
P42
･
When Overwrite handwritten input is valid in
Handwritten input setting of keyboard settings,
handwritten input is available with the numeric or
QWERTY keypad displayed. Overwrite handwritten
input is enabled by default.
→
P43
■
Numeric keypad
This is a widely used keypad on the mobile phone. 3 types
of input methods can be used : Numeric keypad input,
Gesture input, Flick input.
→
P40
■
QWERTY keypad
Enter characters using Romaji input.
■
Handwritten input
Enter characters in handwriting.
a
/
/
/
: Enter pictogram/phrase/smiley/
symbol.
: Enable/Disable overwrite handwritten input.
･
When overwrite handwritten input is enabled, the
illustration of the hand is displayed in light blue.
･
When the numeric keypad or QWERTY keypad is
displayed, touch and hold
→
Slide it to
so
that overwrite handwritten input in full screen is
available.
･
Also used when switching the keypad.
→
P40
: Switch input modes (Alphabet/Number/Kana).
･
Current input mode is displayed in light blue.
･
Slide downward so that overwrite handwritten input
in full screen is available.
: Activate voice input.
･
Slide upward while using overwrite handwritten
input in full screen so that keypad appears.
: Switch from handwritten input to the numeric
keypad or QWERTY keypad.
Character entry
b
a
c
b
c
c
b
a
b
d
c
a
