File management
99
File management
You can send or receive data to or from another terminal
or mobile terminal supporting infrared communication.
･
Transferable data via infrared communication is as
follows.
Phonebook
*
, My profile, name card, sp-mode mail
*
,
schedule&memo
*
, still image, video, ToruCa
*
Sending all data is supported.
･
The communication range for infrared communication
is approximately 20 cm or less, and the infrared ray
radiation angle is 15 degrees or less from the center.
Keep the terminal pointing at the other device's infrared
data port and do not move it until data sending/receiving
completes.
･
Infrared communication may not be performed in areas
exposed to direct sunlight, directly under fluorescent
lights or near other infrared devices.
･
Depending on the terminal of the other party, it may be
difficult to exchange data.
❖
Sending My profile via infrared
communication
1
From the Application menu, [Phonebook]
→
[My profile]
→
m
→
[Send via infrared]
→
[OK]
→
Set the receiver to the receive stand-
by mode
→
[OK]
❖
Sending an entry via infrared
communication
<Example>
Sending a phonebook entry
1
From the Application menu, [Phonebook]
→
[Contacts]
→
m
→
[Others]
→
[Send
data(infrared)]
→
[Send one]
→
Select
contacts to send
→
[OK]
→
Set the receiver to
the receive stand-by mode
→
[OK]
❖
Sending all data via infrared
communication
<Example>
Sending all phonebook entries
･
For sending all, set the docomo apps password in
advance. From the Home screen,
m
→
[Settings]
→
[docomo service]
→
Tap [docomo apps password] to
operate for setting. By default, "0000" is set.
1
From the Application menu, [Phonebook]
→
[Contacts]
→
m
→
[Others]
→
[Send
data(infrared)]
→
[Send all]
→
[Start]
→
Enter
the docomo apps password
→
[OK]
→
Enter
the same authentication password as the
receiver
→
[OK]
→
[OK]
→
Set the receiver to
the receive stand-by mode
→
[OK]
Infrared communication
Infrared data port
15 degrees
Within
approx. 20 cm
