91
Manual
Communication
Setting
Packet
communication
Windows
®
2000
Professional
20
22
Click the “
全般
(General)” tab, and
confirm the settings.
●
Select “
モデム
- FOMA P2403 (Modem-FOMA
P2403)” in the “
接続の方法
(Connect using)”
field.
●
Confirm that “
ダイヤル情報を使う
(Use dialing
information)” has no check mark.
●
The COM port allocated to “FOMA P2403” varies
depending on the PC you use.
●
The phone number shown here is a sample for
the connection to “mopera U”. Enter the access
point number that you actually use. See page 80
for access point numbers other than “mopera U”.
Remove check marks from all the
boxes, and click “OK”.
23
The display in step 21 returns. Click “OK”.
●
Contact your Internet service provider or network administrator for details of the
connection settings.
●
If you specify “
＊
99
＊＊＊
3#” for the phone number field, you are connected to “mopera U”.
See page 80 for access points other than “mopera U”.
Information
Information
21
Click the “
ネットワーク
(Networking)”
tab, and make settings.
●
Select “PPP: Windows 95/98/NT4/2000, Internet”
for the “
呼び出すダイヤルアップサーバーの種類
(Type of dial-up server to be called)” field. Put a
check mark for only “
インターネットプロトコル
(TCP/IP) [Internet protocol (TCP/IP)]” for the
components. Then click “
設定
(Settings)”.
