107
Using
the
FOMA
Terminal
with
a
P
ocket
PC
Tap on “
閉じる
(Close)” at the lower-right or tap on “
×
” at the upper-right on each display.
To Exit P2403 Utility Software
Common
to each data
communication
Windows
M
obile
TM
2003/2003SE
Windows
®
CE
.NET
4.1
■
To carry out Data Communication
Exit the “P2403 utility software”. Data communication is not possible while the “P2403
utility software” is running.
●
When you start up the “P2403 utility software”, the message “
初期設定中です。
(Initializing)”
appears. This is the initialization for starting up, not the initialization of various settings.
●
If AT&S1 is set, you cannot use the “P2403 utility software”. Change the setting to AT&S0
(setting at purchase).
Information
Information
▼
▼
■
Displaying the Setting Items
<Example: Selecting Setting for
Incoming Calls without Caller ID>
From “
各種設定
(Settings)” on the
menu bar, select “
着信動作設定
(Incoming call setting)”.
Select “
非通知着信動作選択
(Handling
selection for incoming call without
caller ID
)”.
Function Reference Window
This displays the settings that correspond to
the item you select. For setting methods, see
pages 118–141.
Displays may slightly differ, but the
operations are the same.
Replace the word “click” with “tap on” in the
instructions.
