37
Call
SH-03G_E_04.fm
[37/41]
■
Answering by answering memo
1
When a call is received, the ringtone sounds
and the incoming illumination flashes
2
[
|
]
/
[Absence Memo]
Playing an answering memo
1
In the home screen, [
]
]
2
[
|
]
/
[Call settings]
3
[Call/Ans Memo]
4
[Answering Memo List]
5
Select an answering memo
You can carry out operations such as using a hands-free call
and adjusting the in-call volume according to the usage
condition during a call.
1
End call
End a call.
2
Mute
Enable or disable mute setting on a current call.
3
Speaker
You can talk with hands-free.
When a Bluetooth device is connected, you can switch audio
output ports.
4
Dialpad
You can enter touch-tone signals.
5
Hold
Hold/Unhold a current call.
6
Switch to video
Switch to a video call.
7
The other party's image
If you cannot receive the other party's image, [
K
] is
displayed.
8
Your own image
9
Switch camera
Switch to the front camera/back camera.
■
Adjusting the in-call volume
1
x
/
y
during a call
■
Switching to full screen display
Switch the video call screen to the full screen display.
1
Touch the screen during a call
:
To disable the full screen display: Touch the screen
■
Adding a call
Place a current voice call on hold and make a call to another party.
Subscription to Call Waiting Service is required to add a call.
1
[
|
] during a call
/
[Add call]
2
Enter a phone number
/
[
0
]
:
Touch the other party put on hold to switch to whom you talk.
■
Switching to voice call
Switch to a voice call during a video call.
1
[
|
] during a call
/
[Switch to voice call]
■
Displaying dialpad
Display the dialpad during a video call.
1
[
|
] during a call
/
[Dialpad]
■
Using Clear talk
When [Clear talk] is enabled, you can measure ambient noises
using the microphone and communicate by making your voices
sound clear during a call.
1
[
|
] during a call
/
[Clear talk]
■
Using Slow Talk
When [Slow talk] is enabled, the speed of the other party's voice is
slowed down during a call and you can hear the voice well.
1
[
|
] during a call
/
[Slow talk]
Operation during a call
Voice call screen
Video call screen
Note the followings to use hands-free or video call.
･
Speak approximately 20 to 40 cm away from the mouthpiece.
When the surroundings are noisy, the sound may break up
and the call may not be satisfactory.
･
When calling outdoors, in a location where surroundings are
noisy or where the sound echoes loudly, use an earphone/
microphone.
･
If the sound breaks up during a hands-free call, lower the
in-call volume.
In the following cases, [(high-quality sound)] is displayed.
While receiving a voice call/During a voice call in VoLTE
While making a video call or receiving a video call/During a
video call
Clear talk processes voices to make conversations sound clear.
Sound quality may vary depending on the surrounding noises
and the tone of the voice.
When using Clear talk, make sure not to cover the hole of the
microphone and move the mouthpiece as close to your mouth
as possible for speaking.
Clear talk is not available in the case that the other party's voice
is not emitted from the earpiece, such as during a hands-free
call.
SH-03G_E.book 37 ページ ２０１５年６月２日 火曜日 午前９時２８分
