Digital
Monitoring
Products
CellCom‑LTE Programming and Installation Guide
16
Reset Timeout
You must enter the programmer menu within 30 minutes of resetting the communicator to avoid reset timeout. After
30 minutes, if you attempt to program by entering the
6653
(PROG) code, the keypad displays
RESET
PANEL
. You
must reset the communicator and enter the program code within the next 30 minutes.
If you are already in the programmer menu and do not press any keys on the keypad for 30 minutes, the
communicator exits programming. All data entered up to that point is saved in the communicator memory.
To exit the programmer menu, use the stop option. The stop option is the second‑to‑last option in programming and
disarms all areas. The programming session is terminated and the keypad returns to status list or main screen.
Special Keys
The following keys and areas are common to all DMP LCD and graphic touchscreen keypads.
Command
Press
CMD
to advance through the programmer menu and through each step of a programming section.
As you advance through the programmer menu, the keypad display any current programming already
stored in the communicator memory. If no change is required for an option, press
CMD
to advance to the
next step.
CMD
is also used to enter information into the communicator’s memory such as an IP address or a zone
name. Press
CMD
after entering information.
Back Arrow
Use the back arrow to back up one step in a programming menu or to erase a typing error while entering
information.
Select Areas
The top row of keys on LCD Keypads are called select areas. The select areas on graphic touchscreen keypads are
along the top of the keypad. When you need to press a select area, the keypad displays the options.
When there are more than four re sponse options avail able, press
CMD
to display the next set of options. Press the
back arrow to return to the previous options.
LCD Keypads
The first select area is on the far left. The second select area is second from the left. The third select area is second
from the right. The fourth select area is on the far right and is for special characters. See Figure 13.
Graphic Touchscreen Keypads
When instructed to press the first select area, touch select area 1; the second select area, touch select area 2; third
select area, touch select area 3; and the fourth select area, touch select area 4. See Figure 14.
CMD
Figure 13: LCD Keypad Select Keys
Figure 14: Graphic Touchscreen Keypad Select Areas
First Letter
Second Letter
Third Letter
Special Character
(
C
B
A
32-Character Display
Select Area 1
Select Area 3
Select Area 2
Select Area 4
Summary of Contents for CellCom LTE Series
Page 4: ......
