9024-066-A-1-15
39
7.4 Accessory Items
The following accessory items are available for the model 9024 slide gate operator.
Contact Sensors
- For use as a secondary entrapment protection device. Miller Edge, Inc., MGO20, MGR20, MGS20
Photo Cell
- Non-contact (photocell) sensors for use as a secondary entrapment protection device.
MMTC, Inc. Model IR55 - P/N 8080-010 MMTC, Inc. Model 60-278 - P/N 8080-011
Carlo Gavazzi Type PMP12 - P/N 8080-030 Carlo Gavazzi Type PMT - P/N 8080-031
Plug-In Low Current Draw Loop Detector
- Detectors plug directly into ports on circuit board simplifying wiring. Can be used
with solar powered operators.
Single channel detector - P/N 94??-010 Dual channel detector - P/N 94??-010
Loop Wire
- 18 AWG loop wire with XLPE insulation is ideal for ground loops. Available in 500 and 1000 foot rolls. Red, blue or
black insulation.
Pre-Fab Loops
- Prefabricated ground loops. 24-foot circumference with 50-foot lead-in. Available in yellow, red or blue jackets.
Not for use in asphalt roadways.
Loop Test Meter
- Meg-ohm meter checks the integrity of ground loops. P/N 9401-045
Time Clock
- 7 day and 365 day time clocks can be used to automatically open gate at pre-set time and days. Compact clock fits
inside the operator. 7 day clock - P/N 2600-791 365 day clock - P/N 2600-795
208/230 VAC Heater with Fan Assembly Kit
- Thermostatically controlled heater and fan for cold and hot environments.
For 208/230 VAC input power ONLY. P/N 1601-197
V-Wheels
- 4 inch and 6 inch. UHMW or Steel. Roller bearings or sleeve bearings. Single or tandem wheel configurations.
Endless Idler Assembly with Protective Cover
- Use when gate operator chain needs 180° return. P/N 2600-818
Guide Rollers with Protective Covers
- A variety of sizes to support slide gates.
Gate End Retainer
- Fits on top of end post and helps stabilize the end of the gate in the open or closed position (End post NOT
provided). P/N 1204-004
Post Mount Kit
- Required for post mount installation. P/N 9000-015.
Chain Tray Kit
- 10 Ft. section. Sections connect together to fit any length gate. P/N 2601-270
Additional #40 Chain
- 20 ft. per box. P/N 2600-442
Surge Devices
- High and low voltage surge suppressors help prevent circuit board failure caused by lightning strikes and
power surges. High Voltage - P/N 1876-010 Low Voltage - P/N 1878-010
Speed Bumps
- Prefabricated six-foot speed bump reduces traffic speed through gate system. P/N 1610-150
12 Volt 18 Amp/Hr Extended Battery
- P/N 1801-004. Two (2) required.
24 VDC Solar Power Kit
- P/N XXXX-XXX.
