Wireless room thermostat DK LOGIC 200
9
11. Options of the thermostat - transmitter
10. Description of LEDs singalling system
AUTO
Automatic mode - a thermostat works by the
pre-set program in line with the adjusted
day and night mode temperature.
MANU
Manual mode - allows adjustment of the
heating temperature without interfering in
the pre-set program.
CLO
Hour and day setting mode.
MANU
AUTO
PROG
Time range programming mode for a day
and night temperature.
PROG
PAr1
A setting mode of the permanently visible
parameter (hour and temperature).
GREEN diode is on
receiver well connected to the grid
BLUE diode blinks
sending or receiving the signal
RED diode blinks
no encoding - memory is empty
RED diode is on interferences
ORANGE diode is on
RE1 relay is shorted
BLUE and RED diodes blink alternately
waiting for the code
BLUE and RED diodes blink at the same time
receiving the code
BLUE and RED diodes are on at the same time
erasing the memory
PAr2
Program # and RESET.
OFF
Turning off thermostat operation.
