5
Wireless room thermostat DK LOGIC 200
4. Description of the transmitter components - buttons
5. Thermostat installation - transmitter
Thermostat DK LOGIC 200 should be located in a place not exposed to other
sources of heat (radiator, fireplace, etc.), affecting the accuracy of the
temperature readout in the room. The device consists of two parts: front - a
microprocessor and rear - connector.
1.
Menu
2.
Setting the temperature (comfort / lowered), operation in a manual mode,
operation in an anti-freezing mode
3.
Confirmation; additionally in AUTO mode, when the button is pressed the
pre-set temperature, time and a day of the week are displayed
4.
Change of functions or pre-set values.
1
2
3
4
1.
Detach the front and back parts of the thermostat.
2.
Install the back part directly on a wall.
3
.
Put two 2 x 1.5 V alkaline batteries type AA / LR6 into the front part of the
thermostat.
4
.
Put the front and back part together - a thermostat is ready for
programming.
Fig. 2 Description of the transmitter's buttons
