Wireless room thermostat DK LOGIC 200
16
17. Protection against freezing function
This function allows protecting the installation against freezing and turns the
boiler on when the room temperature drops below 3 °C.
T
T
1.
Press the button for a few times till and
a temperature of 3 °C appears on the screen
T
2.
After a while, the controller will automatically
switch to perform the protection against
freezing function and the screen will show the
current measured temperature or hour (depen-
ding on setting the PAr1 - see point 19
“PAr1 -
parameter visible on the main screen”
).
18. CLO mode - setting the current hour and day
1.
Press the button for a few times till CLO
symbol appears on the screen. Confirm by
pressing .
t
2.
An indication of hour is blinking on a screen -
this can be set by using the “-/+” buttons and
confirmed by pressing . Next, following the
same steps, the minutes can be set and
confirmed by pressing .
t
t
3.
An indication of a day of the week is blinking on
a screen - this can be set by using the “-/+”
buttons (d:1 - Monday; d:2 - Tuesday, etc.) and
confirm by pressing - after a while, the
controller will switch to the main screen view.
19. PAr1 mode - a parameter visible on a main screen
PAr1
- selection of parameter displayed on the screen during operation of the
thermostat (hour / temperature).
1.
Press the button for a few times till Par1
appears on the screen. Confirm by pressing
.
t
