12
Wireless room thermostat DK LOGIC 200
13.2 Programme Pr.3 - user settings
(cont.)
2.
Use the “-/+” to choose a day (range of days) to
be programmed (acc. to the matching above)
and confirm with . For d:1, 1:U1 will be
displayed on a screen (and in the same manner
for all remaining programmes, in line with the
matching above), next, an hour will be
displayed for which a start of the first day or
night temperature ranges in a given day must
be determined.
3.
Use the “-/+” buttons to set the hour when the
first temperature range starts, and the buttons
to check what temperature - comfort (day)
or lowered (night) is about to start at a given
hour - a corresponding symbol (Sun) or
(Moon) will be displayed on a right side of the
screen.
.
.
t
PROG
PROG
PROG
PROG
PROG
PROG
4.
Confirm the settings by pressing ; A symbol
of another temperature range in a given day will
be displayed on a screen (e.g. 1:U2), and then
the hour when it should start - the setting is
carried out as described above.
5
. All the remaining temperature ranges are being
set in the same way.
t
6
. Once the settings are done, press twice
until the main scree is shown.
AUTO
A thermostat will be programmed for the entire
week between 6 - 9 and 16 - 21 and a daily tempe-
rature of 22°C will be set; for the remaining period
of the day, a lowered temperature of 17°C, as per
the diagram below, will be set.
17
22
°C
hours
6
9
16
21
13.3 Example - programming the automatic operation mode
