13
Wireless room thermostat DK LOGIC 200
13.3 Example - programming the automatic operation mode
(cont.)
1.
Set the values of a day and night temperature
as described in point 21
“Setting the default
day and night temperature”
.
2
. Press twice till the PROG symbolsis shown
on a screen and confirm by pressing .
4.
Use the “-/+” buttons to select the dP.n range
(from Monday to Sunday) and confirm by
pressing . Pn.U1 will be displayed, and
then an hour for which the start of the first day or
night temperature range in this period must be
displayed
t
3.
Use the “-/+” buttons to select the Pr. 3 and
confirm by pressing . A d.1 symbol will be
displayed.
t
PROG
PROG
t
PROG
PROG
PROG
PROG
PROG
5.
Use the “-/+” buttons to set the hour to 6:00; and
the buttom to set the symbol and
confirm by pressing . A symbol of the next
range Pn:U2 will appear on the screen, and
next the hour at which it should start.
t
PROG
6.
Use the “-/+” buttons to set the hour to 9:00; and
the button to set the symbol and confirm
by pressing . A symbol of the next range
Pn:U3 will appear on the screen, and next the
hour at which it should start.
t
PROG
