3
Wireless room thermostat DK LOGIC 200
1. Description of a thermostat
2. Notes on installation
A wireless room thermostat DK LOGIC 200 is designed for automatic adjustment
of temperature in a room by switching on/off of the boiler.
The thermostat is equipped with a relay output, which sends an
on / off
signal
when the pre-set temperature has been exceeded.
A device has the following features:
q
ability of selecting different programs for each day of the week
q
two factory pre-set programs
q
two selectable temperature - day and night
q
six heating periods per day
q
easy and intuitive programming
q
possibility of short-term changes in heating temperature
q
easy installation
q
frost protection
q
heater adjustable every 0.5 °C
q
multifunction display
q
memorizing all the settings, even in the long-term absence of batteries
q
The device must be installed by an authorized person.
q
It is required that the boiler had its own safeguards against excessive
temperature rise of the boiler caused e.g. boiler controller or related
equipment malfunction.
q
The controller should be placed in a location that prevents its heating to a
temperature higher than 40 °C.
q
The controller must not be exposed to water and conditions causing
condensation (e.g. sudden changes in ambient temperature).
q
The device should be installed and operated as described in the assembly
description and rules for electrical equipment.
