© Copyright 2003-2019 Dive Lab® Inc. All rights reserved.
This Guide is made available for the express use of owners and users of the Dive Lab XLDS systems.
This information is subject to periodic updates and changes. Always check the Dive Lab web site for the latest versions.
Document XLDS Guide – Section Four A
Revised September 30, 2019
48
SECTION FOUR A: RDC REPAIR / MAINTENANCE / OVERHAUL
Figure 88 Unzipping Buoyance Wing Outer Cover
Figure 89 Bladder Removed From Outer Cover
Figure 90 Power Inflator
Inspect harness and back plate Figure 92, for
signs of damage. Because webbing is riveted in
place, it cannot be repaired by the user. Contact
Dive Lab, if serviceability is in question.
Figure 91
Inspect ICS restraining straps for serviceability
and damage, if serviceability is in question
replace them.
Figure 92
The original XLDS divers harness was a modified
Miller Bell Harness Figure 93, it did not have
stainless steel back-plate or provisions for a
buoyance wing. Dive Lab replaced the Miller
Harness in 2012, with the current one, which
offers greater flexibility. The Miller Harness is still
supported, and can be replaced if necessary.
