Transport - 80
JT1220 Mach 1 Operator’s Manual
Haul
CMW
Haul
Inspect Trailer
•
Check hitch for wear and cracks. Lubricate if needed.
•
Check u-bolts and axles for wear. Replace if needed.
•
Check fasteners for wear and tightness. Replace or tighten if needed.
•
Check battery for 12V charge.
•
Inspect lights for cleanliness and correct operation. Inspect reflectors and replace if needed.
•
Check tire pressure. Check lug nut tightness with a torque wrench. Adjust if needed.
•
Ensure trailer brakes are adjusted to come on in synchronization with tow vehicle brakes.
•
Check ramps and trailer bed for cracks.
Hitch Trailer
1.
Back tow vehicle to trailer.
2.
Put manual transmission into first or reverse gear or automatic transmission into park. Turn off ignition.
Set parking brake.
3.
Connect trailer drawbar, lunette or coupler to tow vehicle hitch and lock in place with lock pin. If
needed, adjust drawbar, lunette or coupler height to level load.
4.
Connect safety chains to tow vehicle.
5.
Connect breakaway switch cable to tow vehicle. Do not connect to pintle hook or hitch ball.
6.
Plug trailer electrical connector into tow vehicle connector.
7.
Use jack crank to raise jack base and stow.
8.
Remove wheel blocks.
Summary of Contents for JT1220 Mach 1
Page 1: ...JT1220 Mach 1 Issue 2 1 Operator s Manual 054 114 CMW...
Page 19: ...Safety 18 JT1220 Mach 1 Operator s Manual Emergency Procedures CMW...
Page 75: ...Prepare 74 JT1220 Mach 1 Operator s Manual Check Supplies and Prepare Equipment CMW...
Page 107: ...Conduct a Bore 106 JT1220 Mach 1 Operator s Manual Remove Pullback Device CMW...
