109
ECLYPSE APEX
Figure 87: Access Point Wireless Network Settings
Configure the controller’s ECLYPSE Wi-Fi adapter mode as a Wi-Fi access point as follows.
1. Under
Wireless Configuration
, set wireless to
On
.
2. Set the
Mode
to
Access-Point
.
3. Choose whether the
SSID
should be hidden or not.
4. Set the name for this access point by which wireless clients will identify it in
Network Name
.
5. Set the encryption mode to
WPA2, the
Wi-Fi Protected Access II option, to secure Wi-Fi network
with a password.
6. Set the access point’s authentication password in
Password
. This is the password wireless clients
will need to know in order to connect to this access point. The default password must be changed
before you can save and apply your changes to this page.
7. Under
Advanced
, set the
Channel Number
and
Wi-Fi Mode
. See
explanation of these parameters.
8. Click
Apply
.
Configuring the ECLYPSE Wi-Fi Adapter Wireless Networks
Summary of Contents for ECLYPSE APEX
Page 1: ...User Guide ECLYPSE APEX...
Page 171: ...ECLYPSE APEX_UG_11_EN...
