Dish Network 722_TOC, User Manual

Page: 47 / 158

Connections and Setup
101
YPbPr Connections
YP
B
P
R
C
ONNECTIONS
The YPbPr (component) connections provide high-quality video to your HDTV or HD
monitor.
1
Connect between the YP
B
P
R
component connections on the receiver and the nearby TV
using component video cables.
2
Connect audio (red and white) RCA-type cables between the receiver A
UDIO
O
UTPUTS
and
audio input connections that go with the YPbPr connectors on your HDTV or monitor.
3
If you do not see a picture, change the resolution setting on the receiver. Use the steps
below and
Setting Up to Display in HD on the next page.
4
Turn up the volume on your HDTV and confirm you have sound. Check the RCA-type
connections if you don’t have sound.
No Picture on the Nearby TV
This section will help you make a picture on the nearby TV in the event that you could not
do so in the previous sections.
1
Connect RCA-type cable connections between the receiver TV1 Out and the nearby TV.
2
Make sure the receiver and nearby TV are on.
3
Make sure the nearby TV is set to use the RCA-type inputs. Look on the back of your
HDTV and consult your HDTV user’s guide.
4
Change the HDTV settings as described on page 102.
5
Switch to the nearby TV to display from the HD inputs you selected in the previous
sections. If you have a picture from TV1, you are finished.
6
Repeat steps 4 and 5 until the nearby TV displays video from the receiver.
1
3
4
Connec t receiver
an d moni t or wi t h
YPbPr Componen t
connec t ions
Tu rn moni t or
an d receiver on
an d confirm
pic tu re
Confirm
so u n d an d
vo lu me
2
Connec t receiver
an d moni t or wi t h
A ud io cab l es
AUDIO
L
R
SYSTEM INFO
SYSTEM INFO