Dish Network 722_TOC, User Manual

Page: 46 / 158

Chapter 12
100
Connecting to the Nearby TV (TV1)
C
ONNECTING TO THE
N
EARBY
TV (TV1)
This section describes how to connect receiver TV1 output ports to a nearby TV. Select
one of the following methods.
Note: If you would like to put the receiver in a remote location (closet, cabinet, etc.), be
sure to get the replacement remote control that uses UHF Pro signals to control TV1. Call
your DISH Network retailer or go to www.dishnetwork.com, select our Products, and then
click on Accessories.
HDMI Connections
The HDMI connection provides high-quality audio and video to your HDTV or HD Monitor
in one cable.
1
Connect an HDMI cable between the HDMI connection on the receiver and HDTV set or
monitor.
2
Turn on your receiver and TV using the front panel buttons.
3
Confirm that you are getting a picture from the receiver. Consult your HDTV user’s guide if
you need to change your HDTV to display from the Digital Audio/Video input.
4
If you do not see a picture, see No Picture on the Nearby TV on page 101.
Note: In most cases connecting the HDMI cable will provide plug-and-play control of the
monitor’s display resolution and other settings. However, your HDTV may require
selecting a different format to display from the receiver during setup.
5
Turn up the volume on your HDTV and confirm you have sound. If you don’t have sound,
your system may require you to connect audio (red and white) RCA-type cables between
the receiver audio outputs and audio input connections.
HDMI
1
2-4
5
Connect receiver
and monitor with
HDMI cable
Turn monitor
and receiver on
and confirm picture
Confirm
sound and
volume
SYSTEM INFO