ICS-900 Operator’s Manual
36
Doc. 065215-02 9/09
3.9
Configuring Standby Mode
You can configure the ICS-900 to enter standby mode after a period of inactivity
(a period of time in which no data collection and no input from Chromeleon or
Chromeleon Xpress has occurred). In standby mode, the pump flow rate is
reduced.
To configure standby mode:
1. Start the Chromeleon Server Configuration program (click
Start
on the
Windows taskbar and select
All Programs
(or
Programs
)
> Chromeleon >
Server Configuration
).
2. Right-click the ICS-900 device in the timebase and select
Properties
.
3. Click
Options
4. Enter the desired
Standby Flow Rate
and select the
Inactivity Time Out
Period
. If you select (
0, Off
), the ICS-900 does not enter standby mode when
it is idle.
To cancel standby mode and return the pump to the normal flow rate, either turn
on the pump from the ICS-900 Control panel or start a new sequence.
Figure 3-7. ICS-900 Properties Dialog Box: Options Tab Page