Dion-Ag Scorpion 300, Operator'S Manual

Page: 26 / 109

SETUP
26
CONNECTING THE HARVESTER TO THE TRACTOR
FIGURE 16
The tractor drawbar (item 1) must be centered and aligned with the PTO driveshaft (item 2). Align the
harvester shaft (item 3) with the tractor PTO (item 5) by adjusting the height of the adjustable drawbar
(item 4).
Figure 16 PTO shaft alignment
Figure 17
Ensure the distance “A” (see next figure) of the driveshaft guard is superior to zero when the tractor is at its
maximum turning angle. To increase the turning angle and eliminate vibration, position the tractor drawbar
to a length “B” between 50 cm (20”) and 60 cm (24”). If the drawbar can’t achieve this setting, purchase a
drawbar extension available at your Dion dealer.
Figure 17 Tractor drawbar length adjustment
Manual N o. F6918E003E v1.2