Dion-Ag Scorpion 300, Operator'S Manual

Page: 23 / 109

SETUP
23
MANUAL JACK
FIGURE 12
The harvester is delivered with a manual jack (item 1) to support the drawbar when stored. When this jack is
not used, it can be stored in its horizontal position using the locking pin (item 2).
CAUTION: Securely block the forage harvester wheels before removing the tractor hitch pin.
CAUTION: Make sure the lock pin (item 2) securing the jack in its horizontal or vertical position is
properly engaged through the tubes.
Figure 12 Manual jack
12V POWER CONNECTION
NOTE: The metal detector may require in operation up to 25 Amps for short periods. The control box may be
connected directly in the cab standard AMP 3pin 12V plug as long as it offers a circuit protection of at least
25A. If no working plug is available, use the optional battery connection cable (Through Parts). In this case:
1.
Disconnect the battery ground (-) connection to the frame.
2.
Connect the black wire to the tractor frame or matching negative (-) battery terminal.
3.
Connect the white wire to the positive stud (+).
4.
Reconnect the negative (-) battery stud to the frame.
5.
Ensure all connections are properly tightened and protected.
6.
Make sure the power cable is well fastened and routed away from moving parts.
Manual N o. F6918E003E v1.2