4 Configurations on Web Interface
DAG1000-1S/2S/4S User Manual
Copyright©2011-2017 Dinstar
71
4.12.5
Tracert Test
Tracert is short for traceroute, used to track a route from one IP address to another.
Instruction for using Traceroute:
1.
Enter the IP address or domain name of a destination device in the input box of Traceroute,
and then click
Start
.
Figure 4-56 Execute Tracert Test
Destination:
the IP address or domain name of a destination device that needs to be tracked.
Max Hops:
the maximum hops for searching the above IP address or domain name. For
example, if ‘max hops’ is set as 30, and the configured IP address or domain name cannot be
reached within 30 hops, it’s thought that the IP address or domain name cannot be searched.
2.
View the route information from the returned message.
4.12.6
Outward Test
Outward test enables you to diagnose the physical function of FXS port which follow the
GR909 standard. To start outward test, select the FXS ports to be tested and click ‘Start’. The
testing may cost a few minutes.
Figure 4-57 Execute Outward Test
Test Results:
OK: the physical function of the tested FXS ports is working well;
FAIL: There’s something wrong with the physical function of the tested FXS ports.
