4 Configurations on Web Interface
DAG1000-1S/2S/4S User Manual
Copyright©2011-2017 Dinstar
44
(5)
Dial *200# on the extension which is connected to DAG1000-2S, and then dial voicemail
user ID and password for authentication. After that user will hear voice message.
4.7.4
Fax Parameter
The DAG1000-1S/2S/4S device supports the three fax modes: T.38 (IP-based), T.30
(Pass-Through) and Adaptive Fax Mode (automatically match with the peer fax mode).
Figure 4-28 Configure Fax Parameters
Table 4-12 Explanation of Fax Parameters
Fax Mode
There are three fax modes: T.38, T.30(Pass-through), and
Adaptive.
Include
“a=X-fax”
Attribute
If this parameter is enabled, “a=X-fax” attribute will be carried
in SDP
Include
“a=fax”
Attribute
If this parameter is enabled, “a=fax” attribute will be carried in
SDP