4 Configurations on Web Interface
DAG1000-1S/2S/4S User Manual
Copyright©2011-2017 Dinstar
45
Include “a=X-modem”
Attribute
If this parameter is enabled, “a=X-modem” attribute will be
carried in SDP
Include
“a=modem”
Attribute
If this parameter is enabled, “a=modem” attribute will be carried
in SDP
ECM
Whether to enable ‘Error Correction Mode’
（
ECM
）
.
Rate
The rate of sending or receiving fax, default value is 14400bps.
Tone Detection by
Fax sound is detected by caller, callee or automatically.
Switch into Fax Mode
When Detect CNG or
CED
If this parameter is enabled, the system will switch into fax
mode when CNG or CED is detected.
4.7.5
Digit Map
Dialplan is used for number dialing of calls through FXS ports of the DAG1000 device. It
supports DigitMap.
Figure 4-29 DigitMap
DigitMap Syntax:
Supported
Objects
Digit
0-9
T
Timer
DTMF
A digit, a timer, or one of the symbols of
A, B, C, D, #, or *
