4 Configurations on Web Interface
DAG1000-1S/2S/4S User Manual
Copyright©2011-2017 Dinstar
70
4.12.3
Data Restore
On the
Tools
Data Restore
page, you can restore configuration data through uploading a
data file from local computer. The restored configurations will take effect after the device is
restarted.
Figure 4-54 Restore Data
4.12.4
Ping Test
Ping
is used to examine whether a network works normally through sending test packets and
calculating response time.
Instructions for using Ping:
1.
Enter the IP address or domain name of a network, a website or a device in the input box
of Ping, and then click
Start
.
2.
If related messages are received, it means the network works normally; otherwise, the
network is not connected or is connected faultily.
Figure 4-55 Execute Ping Test
