Dinstar DAG1000-1S User Manual Download Page 2

Page: 2 / 80

DAG1000-1S/2S/4S User Manual

Preface

Welcome

Thanks for choosing the

DAG1000-1S/2S/4S Analog Telephone Adapter for VoIP

! We hope

you will make full use of this rich-feature analog telephone adapter (ATA). Contact us if you

need any technical support: 86-0755-26456110/112.

About This Manual

This manual provides information about the introduction of the analog telephone adapter, and

about how to install, configure or use it. Please read this document carefully before install the

ATA.

Intended Audience

This manual is aimed primarily at the following people:



Users



Engineers who install, configure and maintain the ATA.

Revision Record

Document Name

Document Version

Firmware Version

DAG1000-1S/2S/4S Analog Telephone
Adapter User Manual V1.0

V1.0 (2016/12/12)

2.19.10.01

Conventions

ATA or device mentioned in this document refers to the DAG1000-1S, DAG1000-2S or
DAG1000-4S analog telephone adapter. Those words in red are the contents that users need to
pay attention to.

Summary of Contents for DAG1000-1S

















































































Search results

Summary of Contents for DAG1000-1S

Reviews:

Brands by name

Popular brands

Dinstar DAG1000-1S, User Manual

Search results

Summary of Contents for DAG1000-1S

Reviews:

Brands by name

Popular brands